Pattern Text
Pattern Text
(OP)
Hi,
In modelling I have a plate with a pattern of holes in it. I want to create text for the first hole, and then pattern it to all the other holes but be able to modify the text at each instance.
Can this be done?
Thanks
David
In modelling I have a plate with a pattern of holes in it. I want to create text for the first hole, and then pattern it to all the other holes but be able to modify the text at each instance.
Can this be done?
Thanks
David





RE: Pattern Text
month=12-kd6/30
month_text=ITOS(MONTH)
kd6 is an angle of rotation.
----------------------------------------
The Help for this program was created in Windows Help format, which depends on a feature that isn't included in this version of Windows.
RE: Pattern Text
RE: Pattern Text
What sort of text strings do you need.
----------------------------------------
The Help for this program was created in Windows Help format, which depends on a feature that isn't included in this version of Windows.
RE: Pattern Text
It sounds like it is quicker to do this longhand with a cosmetic sketch with notes constrained to each hole. That's a pain. A reference pattern would have been great, then I could have simply changed the text without having to constrain every instance.
I suppose the best way in the circumstances is to reference pattern some datum points and then attach each note to one of those in a single sketch.
Thanks
Dave