line sizing
line sizing
(OP)
Hi Guys,
In EPC word, what is the best option/way and your experiences for line sizing when you have a line list with +100 lines.
Thanks for sharing
In EPC word, what is the best option/way and your experiences for line sizing when you have a line list with +100 lines.
Thanks for sharing





RE: line sizing
In other words, it should be a very complex exercise managing Engineering considerations with Operational and Procurement considerations. Oh yeah, and everything you do in a new field development has a high probability of being very wrong. Every well has a personality and most of them are unpleasant. No well is average, but the only assumption available to you is that all of them will be average. In my experience you do your best knowing that in year 2 and 3 you'll have to have projects to correct problems in the piping caused by above-average wells.
David Simpson, PE
MuleShoe Engineering
"Belief" is the acceptance of an hypotheses in the absence of data.
"Prejudice" is having an opinion not supported by the preponderance of the data.
"Knowledge" is only found through the accumulation and analysis of data.
The plural of anecdote is not "data"
RE: line sizing
If your company doesn't have one, you can develop one yourself using the volumetric flow and pressure drop equations.You will need to validate this spreadsheet before it can be used. This is done by calculating the line size, velocity and pressure drop using the spreadsheet you developed and comparing the solution to both hand calculations and a reputable software like ProMax.
Using ProMax is quite easy. Go to the property window, analysis and then click on line sizing.
Put in the maximum pressure drop (you can find rule of thumb values if you search this forum) for gas pipelines: 0.15 psi/100 ft for secondary lines and 0.25 for the primary gas pipelines. You'll also put in the max velocity (for gas, 80 ft/s). Put in pipe schedule or thickness and click execute. For liquid rule of thumb values, see attached excel sheet.