falnge design with tapped hole
falnge design with tapped hole
(OP)
can anybody introduce some refrences for flange design with tapped hole?
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
falnge design with tapped hole
|
RE: falnge design with tapped hole
RE: falnge design with tapped hole
RE: falnge design with tapped hole
RE: falnge design with tapped hole
RE: falnge design with tapped hole
RE: falnge design with tapped hole
Instead of 4 or 8 or 12 evenly spaced holes with an outside clamping force on to the back side of the full thickness of the flange, you now have 8 or 12 holes in the flange being pulled out by their threads. The flange will distort more, loosen the gasket seating forces.
RE: falnge design with tapped hole
rezapayvar, you may want to look at Studded Outlets for an example. I have no idea of what you are attaching the tapped flange to, but the attached link will provide some examples of proven designs.
RE: falnge design with tapped hole