square helical groove
square helical groove
(OP)
Hi All,
I have a problem while creating a Helical Square groove. I Created using Sweep but it is not looks like square.
Picture attached.
Thanks you all.
I have a problem while creating a Helical Square groove. I Created using Sweep but it is not looks like square.
Picture attached.
Thanks you all.





RE: square helical groove
Use Orientation method - Forced direction follow the cylindrical axis
Raj
NX 8.5
RE: square helical groove
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
RE: square helical groove
Am using NX8.5.
Thanks
RE: square helical groove
Vrishraj is correct.You need to use SWEPT command with orientation set to vector direction.Sweep along guides work better for guide consisting of lines and arcs.I am attaching a image herewith.
Best Regards
Kapil Sharma