25Cr Galling Threshold Stress
25Cr Galling Threshold Stress
(OP)
Hi,
I was wondering if anyone could advise on the galling resistance of 25cr (UNS S32760) on 25Cr. I have has a good search on the Internet and Iam struggling to find any info on its resistance to galling in machine cut threaded components.
I was wondering if anyone could advise on the galling resistance of 25cr (UNS S32760) on 25Cr. I have has a good search on the Internet and Iam struggling to find any info on its resistance to galling in machine cut threaded components.





RE: 25Cr Galling Threshold Stress
Go to Outokumpu and search the professional tools on the web site. They may have galling data.
I'll ask one of them tomorrow (I am at NACE).
= = = = = = = = = = = = = = = = = = = =
Plymouth Tube
RE: 25Cr Galling Threshold Stress
Steve Jones
Materials & Corrosion Engineer
http://www.linkedin.com/pub/8/83b/b04
All answers are personal opinions only and are in no way connected with any employer.
RE: 25Cr Galling Threshold Stress
RE: 25Cr Galling Threshold Stress
Oh. I'd be inclined to use lots of Never-Seez, regardless.
Mike Halloran
Pembroke Pines, FL, USA