Stents Analysis
Stents Analysis
(OP)
How to analyse stent crimping, bending, expansion in Ansys Workbench?
What diameters are used in designing, crimping and expanding the stents?(If the stent nominal diameter is 3 mm)
The stents are designed in Solidworks.
How to apply Loads (pressure/ force),fixtures etc?
Can you please help me explaining in detail?
Thanks in advance
What diameters are used in designing, crimping and expanding the stents?(If the stent nominal diameter is 3 mm)
The stents are designed in Solidworks.
How to apply Loads (pressure/ force),fixtures etc?
Can you please help me explaining in detail?
Thanks in advance




