Aluminium Oval Section
Aluminium Oval Section
(OP)
Hi,
I am looking to source an aluminium oval section or flat oval section, supplier must be in the EU.
Will consider any grade, approx dims = wall thickness should be about 3mm, width = 50mm, height = 80mm,
Thanks
I am looking to source an aluminium oval section or flat oval section, supplier must be in the EU.
Will consider any grade, approx dims = wall thickness should be about 3mm, width = 50mm, height = 80mm,
Thanks





RE: Aluminium Oval Section
http://www.alcoa.com/locations/germany_hannover/en...
Sapa
http://www.sapagroup.com/
Hydro
http://www.hydro.com/en/Products/Extruded-products...
RE: Aluminium Oval Section
I have used hydro before ok for a custom design, how ever looking standard sections.
RE: Aluminium Oval Section
RE: Aluminium Oval Section
B.E.