SACS Post Processor (Redesign)
SACS Post Processor (Redesign)
(OP)
Hello,
I was trying to use the post processor (redesign) option in SACS for a simple frame. When my model contain tubular members the redesign worked fine but when I changed the members to non tubular it gives me a warning "Member Redesign Failed"..
Can anyone explain the reason for those warnings..
Thanks
I was trying to use the post processor (redesign) option in SACS for a simple frame. When my model contain tubular members the redesign worked fine but when I changed the members to non tubular it gives me a warning "Member Redesign Failed"..
Can anyone explain the reason for those warnings..
Thanks





RE: SACS Post Processor (Redesign)
http://appsnet.bentley.com/srmanager/addcall.aspx
RE: SACS Post Processor (Redesign)
Really appreciate your response. I could hardly get any response here on SACS. I just started learning SACS, so coming across lot of questions but nowhere to go.
Iam working in a company where the senior guy left & I started using SACS..
Thanks
RE: SACS Post Processor (Redesign)
RE: SACS Post Processor (Redesign)
Doesnt hurt to post here as well though, some of the replies are interesting to other readers, remember
I have never really used the redesign option in SACS, so would be interested in what you may find, for example!