Sizing load reactor, based on the VFD or the motor?
Sizing load reactor, based on the VFD or the motor?
(OP)
Please help!
I have a 3HP VFD and a 1/2HP actuator. If I want to add in a load reactor, which one is dominate? the motor or the drive? RM0004M12 or RM0012N25??
Appreciated!!
Best Regards
I have a 3HP VFD and a 1/2HP actuator. If I want to add in a load reactor, which one is dominate? the motor or the drive? RM0004M12 or RM0012N25??
Appreciated!!
Best Regards





