Part List
Part List
(OP)
Hi All:
when i create a Part List i cant add "project" column although i assigned all parts to the project!
how can i add the project in my part list?
Many thanks
when i create a Part List i cant add "project" column although i assigned all parts to the project!
how can i add the project in my part list?
Many thanks





RE: Part List
Then in the Partslist, RMB the column, - Style - select the tab Columns - press the button "Attributes..." ( second line from top to the right) select the attribute from above, OK.
Regards,
Tomas
RE: Part List
Yes I have in my assembly navigator column its name is: "Projects" in this column i can find what i need >> but i want to show this column from Drafting >> Part List .. its my problem..
in fact i need to create a "BOM" bill of material which contains:
1. Name 2. Description 3. Material 4. Mass 5. Type 6. Project 7. Quantity.
i have 2 ways to craete it:
1. from Assembly Navigator ... but i cant show the contents of Material column "the material of each part is hidden and when i try to open each part separetly i find the material is active and be shown!! but its not a solution to do it for all parts!!"
2. from Part List " Drafting" ... but i cant show project column which contain the project name which i assigned the part to it .. and it can be shown in assemby navigator..
its my problem..
thanks :)
RE: Part List
IN drafting, first you add an out of the box partslist to your drawing, then add new columns to this partslist. On one of the added columns you do as i described previously, make that column list the attribute "project".
And finally you RMB the partslist and save that as a template for other drawings.
The Assembly navigator can export a static image of how the Assembly navigator looks, but it is not what i expect when i say Parts list.
The drafting partslist will update as soon as anything changes in the assembly.
Regards,
Tomas