Unzipping
Unzipping
(OP)
Hello,
I've "unzipped" some nodes along a line that connected two surfaces and now I have the following error message. Does anyone knows what this means? Btw grid point 23 is one of the nodes created after "unzipping".
Thank you,
W
*** USER FATAL MESSAGE 2007 (GP2)
ELEMENT 97097 REFERENCES UNDEFINED GRID POINT 23
User information:
The element specified points to a non-existent grid or scalar point.
This message may occur in superelement analysis when the reference
grid point GO is neither exterior nor interior to the superelement.
An avoidance is to instead use the vector component method to define
the element coordinate system.
I've "unzipped" some nodes along a line that connected two surfaces and now I have the following error message. Does anyone knows what this means? Btw grid point 23 is one of the nodes created after "unzipping".
Thank you,
W
*** USER FATAL MESSAGE 2007 (GP2)
ELEMENT 97097 REFERENCES UNDEFINED GRID POINT 23
User information:
The element specified points to a non-existent grid or scalar point.
This message may occur in superelement analysis when the reference
grid point GO is neither exterior nor interior to the superelement.
An avoidance is to instead use the vector component method to define
the element coordinate system.





RE: Unzipping
can you see node 23 in the grid echo of the input (in the f06 file) ?
RE: Unzipping
YES
"can you see node 23 in the grid echo of the input (in the f06 file) ?"
I don't think so. I don't know what the grid echo of the input is, but when I search for "23" in the f06 file, it only comes up under the error message listed above.
Another detail I forgot to mention. The error message comes up for each element containing one of the new set of nodes created by this operation.
RE: Unzipping
model/analysis/edit, step through the pages/screens, there'll be one that mentions echoing the input deck
RE: Unzipping
USER FATAL MESSAGE 629 (IFP1D)
ECHO CARD HAS REPEATED OR UNRECOGNIZABLE SPECIFICATION DATA. REPEATED SPECIFICATIONS WILL BE IGNORED.
UNRECOGNIZABLE SPECIFICATIONS WILL BE TREATED AS SORT.
RE: Unzipping
RE: Unzipping
RE: Unzipping
(mine is blank by default)
RE: Unzipping
RE: Unzipping
include the node, error solves...