×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

RAPID Software (Repair Assessment Procedure and Integrated Design)

RAPID Software (Repair Assessment Procedure and Integrated Design)

RAPID Software (Repair Assessment Procedure and Integrated Design)

(OP)
thread2-220355: What Ever Happened to RAPIDC?

Hello all!

I am currently looking for this software I need to use. But I found out FAA did stop the investing in it, the link to download  the soft (http://aar400.tc.faa.gov/RAPID/) is not working anymore. Does any of you still have the install of this or maybe you do have another software solution?
This one was very practical because the results were accepted by EASA (and that's what I'm looking for) and most of all, it is free.

You'd be so nice.

 

RE: RAPID Software (Repair Assessment Procedure and Integrated Design)

Hi NotJack,
Yes, you are right. FAA is not giving any support to this software anymore.
A couple of years ago I was interested in this program too and after a while I was able to contact one of the program developers who provide me the download file.
Unfortunately, i.a.w. the forum policy, I cannot post any email address.
Anyway, the software is still free and can be spread legally, but I don't know if I am allowed to this within the forum.
(Can anybody answer to this and in positive case say me how does it work?)

RE: RAPID Software (Repair Assessment Procedure and Integrated Design)

I've never done it, but you could create a ZIP package and upload it with the "...or upload your file to ENGINEERING.com" file sharing link at the bottom of the page. I do not know if you can remove the file once you have uploaded it.

RE: RAPID Software (Repair Assessment Procedure and Integrated Design)

(OP)
I would be very grateful to you @Ruag if you could send the file in any ways.
Maybe you could create a Dropbox or other upload website as sharefile or mediafire. Or as @FastMouse says, use the storage of eng-tips ;).

RE: RAPID Software (Repair Assessment Procedure and Integrated Design)

It generally seems to be regarded as ok to slightly disguise e-mail addresses so that they make it a bit harder for automated searches; replace . with _dot_ and @ with _at_, etc. I used to go so far as to 'encode' with rot13 or rot47, but it doesn't seem worth it. If by chance a naughty human reads it and makes use of they address the only person it will inconvience is yourself. As long as there aren't any rich pickings it won't attract large numbers of recuiters, spammers, etc., which could potentially annoy the rest of us.-RP.

RE: RAPID Software (Repair Assessment Procedure and Integrated Design)

The objective of the email constraints is not to stop communications, but to stop spam. Therefore, any email addresses in the clear should be avoided, both for protecting the site and protecting the owner of the email address. Note that many members post their website URLs, which often contain their email addresses.

TTFN
FAQ731-376: Eng-Tips.com Forum Policies

RE: RAPID Software (Repair Assessment Procedure and Integrated Design)

(OP)
Thank you very much @Ruag!

Just installed it. Seems to work well.

Thank you again for making this soft coming out again, I think this thread will be useful to someone else.


Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources