Brinell readings acceptable highs and lows for Refinery heater tubes
Brinell readings acceptable highs and lows for Refinery heater tubes
(OP)
Concerning Heater tubes, are there acceptable Brinell hardenss limits, high and low for safe operation.
I would like to know the acceptable high and low limits or good Engineering practice for 1.25cr, 5 cr and 9 cr tubes in refinery service. Any help would be appreciated, thanks.
I would like to know the acceptable high and low limits or good Engineering practice for 1.25cr, 5 cr and 9 cr tubes in refinery service. Any help would be appreciated, thanks.




