PAUT VS RT COST
PAUT VS RT COST
(OP)
Our subcontractors want use phase array in liue RT, we are wondering the impact cost at the project, and the benefits in early finish at the project.
In my opinion we just get improve in safety,
we are not working at night shift, so the impact for man power is not a concern.
Some body here have a study or idea in reference at it?
In my opinion we just get improve in safety,
we are not working at night shift, so the impact for man power is not a concern.
Some body here have a study or idea in reference at it?





RE: PAUT VS RT COST
Disadvantages - no physical record, dependent on operator, can be problematic on stainless.
RE: PAUT VS RT COST
1. The end user may require qualification of the subcontractor. If they demand a 'full blown' qualification, then the premise that an early finish is a possibility will go out of the window.
http://publications.jrc.ec.europa.eu/repository/bi...
and for pipelines, try this one:
https://exchange.dnv.com/Publishing/Codes/download...
2. Setting acceptance criteria
Steve Jones
Materials & Corrosion Engineer
http://www.linkedin.com/pub/8/83b/b04
All answers are personal opinions only and are in no way connected with any employer.