How to subtract the swept
How to subtract the swept
(OP)
I want to subtract the swept. It always gives me an error message 'Thru face does not intersect path of the tool.' Can anyone kindly help with this problem? Thanks
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
How to subtract the swept
|
RE: How to subtract the swept
RE: How to subtract the swept
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
RE: How to subtract the swept
Now I want to subtract the swept, but not successful.
Please help with this. Thanks
RE: How to subtract the swept
The swept body will not subtract correctly in your case for two reasons. One is that your two splines need to be closed (periodic). The second reason is that based on what you indicated about the method you used for creating the two splines I think you swept body limits pass in and out of the cylinder face.
Frank Swinkels
RE: How to subtract the swept
Where is the problem?
NX8, 64bit
RE: How to subtract the swept
Cheers
Si
Best regards
Simon NX7.5.4.4 MP8 - TC 8 www.jcb.com
RE: How to subtract the swept
Cheers
Si
Best regards
Simon NX7.5.4.4 MP8 - TC 8 www.jcb.com