Hamilton drafting table thread 769-192272
Hamilton drafting table thread 769-192272
(OP)
Regarding closed thread769-192272: related to the 60's, drafting tables want to ask berkshire if Alec picked up your Hamilton Standard drafting table... if for some reason he didn't pick it up and you are still looking to find it a good home, please let me know! I am in Torrance and have been looking for one close by.





RE: Hamilton drafting table thread 769-192272
It is still here, it is currently a repository for junk.
Make me an offer I cannot refuse and it is yours.
B.E.
The good engineer does not need to memorize every formula; he just needs to know where he can find them when he needs them. Old professor
RE: Hamilton drafting table thread 769-192272
RE: Hamilton drafting table thread 769-192272
I will contact you .
B.E.
The good engineer does not need to memorize every formula; he just needs to know where he can find them when he needs them. Old professor
RE: Hamilton drafting table thread 769-192272
The good engineer does not need to memorize every formula; he just needs to know where he can find them when he needs them. Old professor
RE: Hamilton drafting table thread 769-192272
I just tried your email address and I could not get it to work.
I do not like posting email addresses on here, because of bots .
However try soaring ( anti spam) at cox.net
Remove the anti spam and use the at symbol.
B.E.
The good engineer does not need to memorize every formula; he just needs to know where he can find them when he needs them. Old professor
RE: Hamilton drafting table thread 769-192272
I don't mind saying I can feel a few tears welling up. Ah, the memories.
Best to you,
Goober Dave
Haven't see the forum policies? Do so now: Forum Policies
RE: Hamilton drafting table thread 769-192272
Thank you for the pics. I am not sure why the email didn't work - I wish I could take the table, its great - unfortunately it looks like its too big for my space. Dang.
RE: Hamilton drafting table thread 769-192272
Same here. I spent 11 years on the board before our company bought a CAD system (35 years ago this past August).
I've got a cheap 'Plan Holder' drawing board in my garage that I inherited from my father but it's being used to hold my shortwave radio equipment.
BTW, berkshire, exactly where is this table located at the moment?
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
RE: Hamilton drafting table thread 769-192272
https://post.craigslist.org/manage/3259711795
RE: Hamilton drafting table thread 769-192272
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
RE: Hamilton drafting table thread 769-192272
Too bad its too big for you. You have to have lots of room for one of these it is 73" wide X 43 1/2" deep. It also takes 4 guys to carry it assembled.
John Baker.
It is in Escondido about 90 miles from you. On my back porch, which is where those pictures were taken.Contact me direct if you are interested.
It can be dis- assembled for transit.
B.E.
The good engineer does not need to memorize every formula; he just needs to know where he can find them when he needs them. Old professor
RE: Hamilton drafting table thread 769-192272
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
RE: Hamilton drafting table thread 769-192272
IF not the 3259711795 i sthe liting number.
http://portland.craigslist.org/wsc/fuo/3259711795....