Magnetostatic ANSYS
Magnetostatic ANSYS
(OP)
Hi everbody,
I have a problem in Magnetostatics. Source conductor -> Conductor type = stranded -> Conducting area ???. I dont know what it means Conducting area. I dont understand from help.
This parameter fundamentally change my results.
Please, Can you give me a advice?
Thank you for your answers
I have a problem in Magnetostatics. Source conductor -> Conductor type = stranded -> Conducting area ???. I dont know what it means Conducting area. I dont understand from help.
This parameter fundamentally change my results.
Please, Can you give me a advice?
Thank you for your answers





RE: Magnetostatic ANSYS
I haven't used ANSYS for FEM simulations - I'm into Ansoft Maxwell - so it'll be my guessing now.
Stranded means that conductor is made from many separate wires (like a string).
It is obvious that not 100% of condutor cross section is copper (or other conducting material).
So, by my guess.. conduction area is the real conductiong cross section of copper.
"If an experiment works, something has gone wrong"