INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Jobs

Component ID

Component ID

(OP)
Rubbish photo but the component is marked EA Cm 3
472M 46
It is like a disc capacitor 14mm diameter but with a third terminal in the middle at the back. Blue in colour in the area of the board where the power comes in. The 'C' in the component marking is large with the 'm' inside it.

RE: Component ID

(OP)
The component in question is the lighter coloured one on the left. There are two one behind the other.

RE: Component ID

Might be a 4700pF 20% 3-terminal capacitor?

Glenn

RE: Component ID

(OP)
With you now.. FL3 and the one behind FL4

RE: Component ID

Like geekEE, I believe it is a 2 x 4700pF capacitor and is part of the common mode noise filtering where each capacitor connects to one of the input lines to ground. The two black objects appear to be input fuses - also part of the input protection. Capacitor bypassing input AC voltage to ground as part of the common mode noise bypass are refered to as "Y" capacitors, and are required to meet safety agency approvals. Note the long list of approval agency logos on the part. The light blue part might be from input line-to-line, and if so is refered to as a "X" capacitor.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources


Close Box

Join Eng-Tips® Today!

Join your peers on the Internet's largest technical engineering professional community.
It's easy to join and it's free.

Here's Why Members Love Eng-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close