How to analyse termo-mechanical model
How to analyse termo-mechanical model
(OP)
i just started working in MSC nastran . I work on MSC patran 2011. 64 bit.
solver Msc nastran
Pre/post processor MSC patran
I am facing a problem to find the deflection of a steel plate when applied with a thermal load .. that is strains developed due to temp gradient due to the heating..
Also how to model a moving heating torch(oxy- acetylene) with a particular velocity along a line say 7mm/s
Is there any one who can help to do the modelling at least with some links to tutorials related to it..
Link to a thesis work having a related work is given below .. If req please have a look.
http://orbit.dtu.dk/fedora/objects/orbit:85702/dat...
solver Msc nastran
Pre/post processor MSC patran
I am facing a problem to find the deflection of a steel plate when applied with a thermal load .. that is strains developed due to temp gradient due to the heating..
Also how to model a moving heating torch(oxy- acetylene) with a particular velocity along a line say 7mm/s
Is there any one who can help to do the modelling at least with some links to tutorials related to it..
Link to a thesis work having a related work is given below .. If req please have a look.
http://orbit.dtu.dk/fedora/objects/orbit:85702/dat...




