Disc Nut! Will these threads strip?
Disc Nut! Will these threads strip?
(OP)
I'm dealing with a material change of a disc nut to be made of 630 AL-BRZ(Yield Stress-40000 PSI). The Nut is 2-(7/8)"-12UNC. At max shear stress, what is the max force and torque that can be applied to threads before failure.
Nut height-1-(5/8)"
Nut height-1-(5/8)"





RE: Disc Nut! Will these threads strip?
RE: Disc Nut! Will these threads strip?
RE: Disc Nut! Will these threads strip?