Rebar Bending Tolerances
Rebar Bending Tolerances
(OP)
anyone know what standard rebar bending would fall under? I have a 5" stirrup, and want to know what the max/min dim can be for said stirrup
Thanks
Thanks
When was the last time you drove down the highway without seeing a commercial truck hauling goods?
Download nowINTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
|
RE: Rebar Bending Tolerances
Looks like plus or minus one inch, unless the bars are mightily big.
RE: Rebar Bending Tolerances
Section 2.1 gives tolerances on reinforcing steel fabrication:
Per Fig. 2.1(a) For stirrups - (+/-) 1/2" for bar sizes #3, #4, #5, and with gross length < 12'-0"
(+/-) 1" for bar sizes #3, #4, #5, and with gross length > 12'-0"
(+/-) 1" for bar sizes #6, #7, and #8
Section 2.2 gives tolerances on reinforcement location: