ABAQUS 2D: Elements missing property definitions
ABAQUS 2D: Elements missing property definitions
(OP)
Hi
Im trying to model cohesive joints in 2D. I get an error: 120 elements missing property definitions. I know this is a common error in Abaqus and i have tried everything: meshing, remeshing, deleting and re assigning sections. I have also tried all fixes seen in eng-tips and other websites. Nothing works. Any suggestions to fix this issue is highly welcome. Thanks
Phantom
P.S.I have attached the cae file for reference.
Im trying to model cohesive joints in 2D. I get an error: 120 elements missing property definitions. I know this is a common error in Abaqus and i have tried everything: meshing, remeshing, deleting and re assigning sections. I have also tried all fixes seen in eng-tips and other websites. Nothing works. Any suggestions to fix this issue is highly welcome. Thanks
Phantom
P.S.I have attached the cae file for reference.





RE: ABAQUS 2D: Elements missing property definitions
I found out where the error is. the 120 elements missing the properties are from my adhesive and in the mesh module for it, in mesh/ element type, i didn't assign cohesive properties although in the material and section module, i did. Please ignore the above problem
thanks