API mandates PSV for pressure vessel?
API mandates PSV for pressure vessel?
(OP)
Is there an API mandated requirement to have a PSV on all pressure vessels?
We would like to remove PSVs from our smaller air receivers. The only credible relief scenario is a fire case but only if a water heel is in the receiver.
Our air driers are presently and have been, for the last 5 years or longer, quite effective in keeping the compressed air dry. The instrument air compressors and large air receivers all have relief devices that are well maintained. Will these facts eliminate the need for relief devices on the smaller vessels throughout the plant? We will conduct a PHA and MOC/PAC before taking action.
We would like to remove PSVs from our smaller air receivers. The only credible relief scenario is a fire case but only if a water heel is in the receiver.
Our air driers are presently and have been, for the last 5 years or longer, quite effective in keeping the compressed air dry. The instrument air compressors and large air receivers all have relief devices that are well maintained. Will these facts eliminate the need for relief devices on the smaller vessels throughout the plant? We will conduct a PHA and MOC/PAC before taking action.





RE: API mandates PSV for pressure vessel?
You really need to talk to an authorized inspector for your jurisdiction as to whether it's acceptable to remove the safety valves, not anonymous individuals on the internet who might well be in an entirely different country.
Patricia Lougheed
******
Please see FAQ731-376: Eng-Tips.com Forum Policies: Eng-Tips.com Forum Policies for tips on how to make the best use of the Eng-Tips Forums.
RE: API mandates PSV for pressure vessel?