Suitable lubricants for Super Duplex Stainless
Suitable lubricants for Super Duplex Stainless
(OP)
Dear all,
In Cold forming Super duplex SS. (Like Zeron etc.) are there specific high pressure lubricants used?
I am thinking that a lube should have C so that you don't impregnate the surface.
Any experiences?
thanks





RE: Suitable lubricants for Super Duplex Stainless
I would contact either of the mills posted below directly. They should have the best source of information on forming and lubricants.
http://www.outokumpu.com/en/Pages/default.aspx
http://www.industeel.info/datasheets/pdf/UR%202507.pdf