Hi Everyone
Hi Everyone
(OP)
Hi Every one,
I'm not so expert in Abaqus, I built a model and meshed it and defined everything. Here I used cohesive elements. But when I run it, I get missing a property definition error.
Could you please help me solve it.
I have also attached my file.
Thanks...
I'm not so expert in Abaqus, I built a model and meshed it and defined everything. Here I used cohesive elements. But when I run it, I get missing a property definition error.
Could you please help me solve it.
I have also attached my file.
Thanks...





RE: Hi Everyone
***ERROR: ELEMENT 12801 IS MISSING A PROPERTY DEFINITION; CHECK ELEMENT SET
AND ELEMENT DEFINITIONS
** Section: Layers
*Solid Section, elset=H_H_LAYER1, orientation=H-Ori-1, material=Iso
,
** Section: Layers
*Solid Section, elset=H_H_LAYER2, orientation=H-Ori-1, material=Iso
,
** Section: Layers
*Solid Section, elset=H_H_LAYER3M, orientation=H-Ori-1, material=Iso
,
*Solid Section, elset=H__I4, orientation=H-Ori-1, material=Iso
,
** Section: Layers
*Solid Section, elset=H_H_LAYER5, orientation=H-Ori-1, material=Iso
,
** Section: Interzone
*Solid Section, elset=H_H_INTER1, orientation=H-Ori-1, material=I-1
,
** Section: Interzone
*Solid Section, elset=H_H_INTER3M, orientation=H-Ori-1, material=I-1
,
** Section: Interzone
*Solid Section, elset=H_H_INTER4, orientation=H-Ori-1, material=I-1
,
** Section: Interzone
*Solid Section, elset=H_H_INTER2, orientation=H-Ori-1, material=I-1
,
** Section: Interzone
*Solid Section, elset=H_H_INTER5, orientation=H-Ori-1, material=I-1
,