Tailing Pipe MOC - What is used in Tar Sands?
Tailing Pipe MOC - What is used in Tar Sands?
(OP)
As described - what alloys are used?
Service temperature is down to -40°F, with welding to flanges, etc. Charpy impact toughness is 25 ft-lb minimum. The main service concern is erosion corrosion.
Service temperature is down to -40°F, with welding to flanges, etc. Charpy impact toughness is 25 ft-lb minimum. The main service concern is erosion corrosion.





RE: Tailing Pipe MOC - What is used in Tar Sands?