"Face Failed Checks" during Sewing Sheet Bodies
"Face Failed Checks" during Sewing Sheet Bodies
(OP)
When trying to sew two sheet bodies I get this error message. What do you think is the problem, and how can I fix it?
Thanks
Thanks
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
"Face Failed Checks" during Sewing Sheet Bodies
|
RE: "Face Failed Checks" during Sewing Sheet Bodies
Analysis -> Examine Geometry...
...and toggle all the options ON and do a 'Select All' and press MB2. You can ignore items like 'Sheet Boundaries', but pay attention 'Self-Intersection' and 'Consistency' in particular.
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
UG/NX Museum: http://www.plmworld.org/p/cm/ld/fid=209
To an Engineer, the glass is twice as big as it needs to be.
RE: "Face Failed Checks" during Sewing Sheet Bodies
RE: "Face Failed Checks" during Sewing Sheet Bodies
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
UG/NX Museum: http://www.plmworld.org/p/cm/ld/fid=209
To an Engineer, the glass is twice as big as it needs to be.
RE: "Face Failed Checks" during Sewing Sheet Bodies
www.nxjournaling.com
RE: "Face Failed Checks" during Sewing Sheet Bodies