In line Turbidity Sensors
In line Turbidity Sensors
(OP)
I would like to measure water turbidity in a 2" pipe (~5-100 NTU), flowing at about 10 ft/sec. The sensor would preferably have a 4-20 mA output. We tried using this one:
http: //www.cole parmer.com /Product/T hermo_Scie ntific_Aqu aSensors_D ataStick_W ide_Range_ Turbidity_ Sensor/WU- 99900-10?r eferred_id =778&s ku=9990010
It did not work out so well. Does anyone here have experience with turbidity sensors that can recommend one for my application?
Thanks!
http:
It did not work out so well. Does anyone here have experience with turbidity sensors that can recommend one for my application?
Thanks!




