Cosmos
Cosmos
(OP)
Do you still get cosmos with the latest basic (Standard) version of SW?
Cheers
Mick
Cheers
Mick
When was the last time you drove down the highway without seeing a commercial truck hauling goods?
Download nowINTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
|
RE: Cosmos
Dan
www.eltronresearch.com
Dan's Blog
RE: Cosmos
I believe it still comes with the higher end packaging of Simulation. You would be better served to ask this question on the SolidWorks:Simulation/FEA (COSMOS) forum.
TOP
CSWP, BSSE
www.engtran.com www.niswug.org
www.linkedin.com/in/engineeringtransport
Phenom IIx6 1100T = 8GB = FX1400 = XP64SP2 = SW2009SP3
"Node news is good news."
RE: Cosmos
E.g., you can do a linear FE analysis on something like a skid built from structural sections, but you have to make the model in one piece, e.g. by subtracting the internal cavities from the enclosing volume.
You can induce SE to produce a nice colored report to show your boss, but if there's no budget for more software, you probably won't keep doing it.
Mike Halloran
Pembroke Pines, FL, USA
RE: Cosmos