Cache mode
Cache mode
(OP)
Hi,when i open a catproduct, Catia give me the following message:
"Avertissement Test de session Lecture du fichier \\?\C:\Documents and Settings\Cache\xxxx.cgr impossible. Accès refusé"
or
"Avertissement Test de session Lecture du fichier \\?\C:\Documents and Settings\Cache\xxxx.cgr impossible. erreur de version."
I work with cache mode. So Catia can't create cgr and the mistake part doesn't appear on screen but if i load it in conception mode , it appear. I think it is a CGR problem but I can't solve it.
Thanks
"Avertissement Test de session Lecture du fichier \\?\C:\Documents and Settings\Cache\xxxx.cgr impossible. Accès refusé"
or
"Avertissement Test de session Lecture du fichier \\?\C:\Documents and Settings\Cache\xxxx.cgr impossible. erreur de version."
I work with cache mode. So Catia can't create cgr and the mistake part doesn't appear on screen but if i load it in conception mode , it appear. I think it is a CGR problem but I can't solve it.
Thanks





RE: Cache mode
Win XP64
R20/21, 3DVIA Composer 2012, ST R20
Dell T7400 16GB Ram
Quadro FX 4800 - 1.5GB
RE: Cache mode
When you work with the cache management ( tools-->Option-->Product Structure-->Cache management-->"Work with cache system"), Catia creates automatically a cgr files for all the part of the catproduct. All cgr files are save in a file.It is lighter. It isn't me who create this cgr files.
When you want to work in a part in specially, catia load it in "Design mode".
My problem is : when catia try to open a catproduct with this option, it writes me these messages of error. So some parts doesn't appear and I must to active the design mode to see them.
RE: Cache mode
RE: Cache mode