7.5 Drawing View Display not updating correctly
7.5 Drawing View Display not updating correctly
(OP)
I've recently moved to NX 7.5 from 6 and have had no display problems. My new 64-bit machine has a Qundro pro video card. Here's the problem I'm now having. While in a drawing and trying to do View Dependent Edit or dimensioning the views outside where I've zoomed into do not display correctly when I move or unzoom my view. I can move around and zoom in and out with ease and the display is great. But when I do any sort of work in a view I get that display problem. What do I need to set to get it to display correctly all of the time?





RE: 7.5 Drawing View Display not updating correctly
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
UG/NX Museum: http://www.plmworld.org/p/cm/ld/fid=209
To an Engineer, the glass is twice as big as it needs to be.
RE: 7.5 Drawing View Display not updating correctly
RE: 7.5 Drawing View Display not updating correctly
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
UG/NX Museum: http://www.plmworld.org/p/cm/ld/fid=209
To an Engineer, the glass is twice as big as it needs to be.
RE: 7.5 Drawing View Display not updating correctly
RE: 7.5 Drawing View Display not updating correctly
You'll probably find that your on NX7.5.0.32 (Help _> About NX -> System Information). If you are, download the NX7.5.2 or higher Maintenance Release from Siemens.
Anthony Galante

Technical Resource Coordinator
NX4.0.4MP10, NX5.0.6, NX6.0.5, NX7.0.1, NX7.5.0-> NX7.5.5 & NX8.0.0 -> NX8.0.1
RE: 7.5 Drawing View Display not updating correctly
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
UG/NX Museum: http://www.plmworld.org/p/cm/ld/fid=209
To an Engineer, the glass is twice as big as it needs to be.