extrusion bac
extrusion bac
(OP)
Hello to All
Someone knows where I can find the data of extrusion BAC 1514-1687? I am working in B727, where it needs to perform a splice repair. I have seen in SRM 727 but there is no the dash that I need. There are only the dash 404 and 1017. I will apreciate any help.
Manuelo.
Someone knows where I can find the data of extrusion BAC 1514-1687? I am working in B727, where it needs to perform a splice repair. I have seen in SRM 727 but there is no the dash that I need. There are only the dash 404 and 1017. I will apreciate any help.
Manuelo.





RE: extrusion bac
If the 727 owner/operator has access to that web site via their agreement with Boeing, you can find it there.
If you do not have access to that web site I am not sure where else you would find it. I can't send it to you as I would be in violation of my company's agreement with Boeing.
RE: extrusion bac
I presume Boeing has 727 service engineers very familiar with the fleet who can assist You, this issue.
BAC1514-1687 profile is listed in my old Tiernay [now Castle Metals] extrusion catalog as their P/N 60-21368. They [Castle Metals] may be able to provide the profile shape.
CAUTION. Knowing the profile shape is only 1/2 the battle... it is important to know the alloy/temper. Strongly suggest You do a hardness and conductivity test of the existing part to ball-park the alloy/temper.
NOTE. I've heard that BAC profile info MIGHT be available thru MyBoeingFleet.com... asssuming you are a registered user.
Regards, Wil Taylor
Trust - But Verify!
We believe to be true what we prefer to be true.
For those who believe, no proof is required; for those who cannot believe, no proof is possible.
RE: extrusion bac
Yes, when I was a registered user with Boeing, I used to get data from myboeingfleet for working.
Well, I will try with Castle Metals catalog.
Best Regards.