Parts with Smart Features not showing up in drawings
Parts with Smart Features not showing up in drawings
(OP)
I'm creating a drawing, and I noticed that the hardware with smart features are not showing up in my drawings.
I have a cabinet with a drawer and the drawer guides are not showing up. I can click on where they should be, and they will highlight, but will not show up....even if I hide all the other components in the model.
Is there something I'm missing?
Thanks!
I have a cabinet with a drawer and the drawer guides are not showing up. I can click on where they should be, and they will highlight, but will not show up....even if I hide all the other components in the model.
Is there something I'm missing?
Thanks!






RE: Parts with Smart Features not showing up in drawings
TOP
CSWP, BSSE
www.engtran.com www.niswug.org
www.linkedin.com/in/engineeringtransport
Phenom IIx6 1100T = 8GB = FX1400 = XP64SP2 = SW2009SP3
"Node news is good news."
RE: Parts with Smart Features not showing up in drawings
Eric