GEOPAK Necessary?
GEOPAK Necessary?
(OP)
Hi all,
I work in the construction testing/geotechnical engineering industry, and I am the main drafter for my company. I've got quite a bit of Microstation experience, but I was wondering if GEOPAK was necessary. I don't do much with ODOT (Ohio DOT) projects, but I do a lot with soil boring plans and soil profiles.
Some thoughts/opinions/advice would absolutely be appreciated! Thanks. :)
-Shannon
I work in the construction testing/geotechnical engineering industry, and I am the main drafter for my company. I've got quite a bit of Microstation experience, but I was wondering if GEOPAK was necessary. I don't do much with ODOT (Ohio DOT) projects, but I do a lot with soil boring plans and soil profiles.
Some thoughts/opinions/advice would absolutely be appreciated! Thanks. :)
-Shannon





RE: GEOPAK Necessary?
The soon to be release MicroStation V8i (SELECTseries 3) will have a built in terrain modeler in the platform product. No GEOPAK or InRoads required.
If I were you I would be looking at gINT from Bentley if you dont already have it. http://www.bentley.com/en-US/Products/gINT/
IMHO you don't have to purchase the full version of GEOPAK there is Site that you could purchase at a lower cost.
HTH,
Bob Mecham
Training | Consulting | Programming
www.EnvisionCAD.com
Facebook: http://www.facebook.com/EnvisionCAD
Twitter: http://twitter.com/envisioncad
Youtube: http://www.youtube.com/user/envisioncad
RE: GEOPAK Necessary?
Thanks for the quick response!
RE: GEOPAK Necessary?
http
Have fun.
Training | Consulting | Programming
www.EnvisionCAD.com
Facebook: http://www.facebook.com/EnvisionCAD
Twitter: http://twitter.com/envisioncad
Youtube: http://www.youtube.com/user/envisioncad
RE: GEOPAK Necessary?