Using a customized parts list template
Using a customized parts list template
(OP)
I have been trying to set up a customized parts list template but the help document tell me to change this variable to point for a template part in Teamcenter. Where do I find this variable? Is it just in the customer defaults?
(Drafting_plistTCINDefaultPartsListName=@DB/my_template/rev)
Many thanks
Simon.
(Drafting_plistTCINDefaultPartsListName=@DB/my_template/rev)
Many thanks
Simon.
Best regards
Simon NX7.5.3 - TC 8 www.jcb.com





RE: Using a customized parts list template
Best regards
Simon NX7.5.3 - TC 8 www.jcb.com
RE: Using a customized parts list template
RE: Using a customized parts list template
I then created an empty item in Teamcenter and added a model dataset and imported the .prt in to the named references. I opened this in NX which was basically a simple table with 3 headers (PC NO, PART NAME AND QTY) I added another columnn and changed the columns so the following attributes would be displayed under these headings ITEM (<W$=@CALLOUT>) PART NUMBER ($=) PART NAME (<W$=@DB_PART_NAME>) and QTY ($~Q)I also changed the format so the headed was at the top and the parts list grew in size downwards as well as turning on SORT ON UPDDATE.
In NX I went to customer defaults, Draffting, Annotation and Parts List and in the text box next to Default Parts List: TCIN mode I typed the following: @DB/part_name/rev
Now when I use the add parts list command on the drafting tool bar, my nice shiney new parts list comes in with all the correct columns and formating showing.
Best regards
Simon NX7.5.3 - TC 8 www.jcb.com