Abaqus Problem
Abaqus Problem
(OP)
I have created a 3D model of 2 solid parts and 1 shell part. I created mesh sets for the 2 solid parts but when I apply initial stress conditions using the input file, the following error is displayed on the .dat file when I run the input file:
AN INITIAL CONDITION HAS BEEN SPECIFIED ON ELEMENT 0 BUT THIS ELEMENT HAS NOT BEEN DEFINED
What does this mean since I do not have Element 0 in my model?
Your help will be appreciated.
AN INITIAL CONDITION HAS BEEN SPECIFIED ON ELEMENT 0 BUT THIS ELEMENT HAS NOT BEEN DEFINED
What does this mean since I do not have Element 0 in my model?
Your help will be appreciated.





RE: Abaqus Problem
Would you please let me know what did you type in input file in order to define the initial condition.
RE: Abaqus Problem
Soil,0,35,-630000,0,1.0,1.0
*Initial Conditions, Type=Stress, Geostatic
Plug,0,35,-360000,15,1.0,1.0
RE: Abaqus Problem
RE: Abaqus Problem
RE: Abaqus Problem
RE: Abaqus Problem
RE: Abaqus Problem
RE: Abaqus Problem
RE: Abaqus Problem
RE: Abaqus Problem
RE: Abaqus Problem
RE: Abaqus Problem
RE: Abaqus Problem
RE: Abaqus Problem
RE: Abaqus Problem
Do you have experience in using shell elements?
RE: Abaqus Problem
RE: Abaqus Problem