PWHT ( coil or Band width ) requirement
PWHT ( coil or Band width ) requirement
(OP)
What are the deciding factor for PWHT ( coil or Band width ) requirement.
Some specs/ codes say 75 mm , some say 50 mm , some say 150 mm. So what are the basic criteria for selecting the Width of Induction Coil?
Some specs/ codes say 75 mm , some say 50 mm , some say 150 mm. So what are the basic criteria for selecting the Width of Induction Coil?





RE: PWHT ( coil or Band width ) requirement
Steve Jones
Materials & Corrosion Engineer
http://www.linkedin.com/pub/8/83b/b04
RE: PWHT ( coil or Band width ) requirement
D 10.10 really helpful
Thanks again