×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

The 2012 Siemens PLM calendars are now available...
3

The 2012 Siemens PLM calendars are now available...

The 2012 Siemens PLM calendars are now available...

3
(OP)
I hope Dave doesn't take this down as the only thing we're trying to do here is give away some FREE 2012 Siemens PLM calendars:

http://am.siemensplmevents.com/?elqPURLPage=1403

BTW, all of the images seen in the calendar were produced from models created AND rendered using either NX or Solid Edge.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
UG/NX Museum:   http://www.plmworld.org/p/cm/ld/fid=209

To an Engineer, the glass is twice as big as it needs to be.
 

RE: The 2012 Siemens PLM calendars are now available...

Thanks JOhn!

John Joyce
N.C. Programming Supervisor
Barnes Aerospace, Windsor CT
NX6.0.5.3

RE: The 2012 Siemens PLM calendars are now available...

thank you

RE: The 2012 Siemens PLM calendars are now available...

What's the catch?  It used to be like pulling teeth to get one of these...
Thanks John!

"Good to know you got shoes to wear when you find the floor." - Robert Hunter
 

RE: The 2012 Siemens PLM calendars are now available...

Thanks John.

RE: The 2012 Siemens PLM calendars are now available...

Ordered mine.
Thank you.
 

"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli

RE: The 2012 Siemens PLM calendars are now available...

When living in Europe, you don't have that much luck to obtain one. sad

Best regards,

Michaël.

NX7.5.4.4 + TC Unified 8.3
Win 7 64 bit

 

RE: The 2012 Siemens PLM calendars are now available...

Ordered... Is there a problem with Europe :)?
Mailing should not be a problem, what time does it take to hit the "sent" button?
Still ontopic: Got a 2011 hardcopy by the UGS locals last year.

But thanks John (I'm eager to get one)!

Older budweiser

RE: The 2012 Siemens PLM calendars are now available...

"To receive a complimentary calendar, please complete the fields below and hit 'Request Calendar'.  This promotion is only available in North and South America."

I filled in the form and send the request, but the first rule above the fields stated ; This promotion..... (you can read)

Best regards,

Michaël.

NX7.5.4.4 + TC Unified 8.3
Win 7 64 bit

 

RE: The 2012 Siemens PLM calendars are now available...

thanks Michael
I should read better...eagerness....

Older budweiser

RE: The 2012 Siemens PLM calendars are now available...

(OP)
Calendars should also be available from local Siemens PLM sales offcies as well as distributors who sell and support either NX or Solid Edge, and this will include Europe and Asia as well as the Americas (that's actually how I got my calendar, from the sales office on the first floor of our building here in Cypress).

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
UG/NX Museum:   http://www.plmworld.org/p/cm/ld/fid=209

To an Engineer, the glass is twice as big as it needs to be.
 

RE: The 2012 Siemens PLM calendars are now available...

The only time I had no problem getting calendars was the year that the company I worked for had an image in the calendar. We were sent a copy of the image on a wood plaque and 50 calendars to pass around to the engineering department.
 

"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli

RE: The 2012 Siemens PLM calendars are now available...

(OP)
If you would like to see what some of the early calendars (we've been doing this since 1995) looked like, go to:

http://www.plmworld.org/index.php?mo=cm&op=ld&fid=238

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
UG/NX Museum:   http://www.plmworld.org/p/cm/ld/fid=209

To an Engineer, the glass is twice as big as it needs to be.
 

RE: The 2012 Siemens PLM calendars are now available...

OK has anyone recieved their Calendar yet?
I am still waiting

John Joyce
N.C. Programming Supervisor
Barnes Aerospace, Windsor CT
NX6.0.5.3

RE: The 2012 Siemens PLM calendars are now available...

I am still waiting too.

RE: The 2012 Siemens PLM calendars are now available...

(OP)
Please email me your mailing address and I'll take care of it (if you don't already know my email address if you just add a couple of periods to my E-Tips username where you'd expect them to be and then add the relevant email stuff I should get it OK).

BTW, John, I've already taken care of yours.

Sorry for the delay...

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
UG/NX Museum:   http://www.plmworld.org/p/cm/ld/fid=209

To an Engineer, the glass is twice as big as it needs to be.
 

RE: The 2012 Siemens PLM calendars are now available...

Got them yesterday!

Thanks John

John Joyce
N.C. Programming Supervisor
Barnes Aerospace, Windsor CT
NX6.0.5.3

RE: The 2012 Siemens PLM calendars are now available...

Thanks a lot, John!

RE: The 2012 Siemens PLM calendars are now available...

I am also still patiently waiting:)

RE: The 2012 Siemens PLM calendars are now available...

(OP)
If you went to the website and filled out all the information yet you've never gotten your calendar, I can help, but you will need to either post you name and mailing address here or you will need to email it to me.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
UG/NX Museum:   http://www.plmworld.org/p/cm/ld/fid=209

To an Engineer, the glass is twice as big as it needs to be.
 

RE: The 2012 Siemens PLM calendars are now available...

Has somebody got the 2012 calendar? I didn't!

RE: The 2012 Siemens PLM calendars are now available...

Better put your order in for the 2013 calendar now!

www.nxjournaling.com

RE: The 2012 Siemens PLM calendars are now available...

(OP)
See my last post. A few people did contact me and I was able to get them their calendars, so if you didn't take me up on my offer...

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

RE: The 2012 Siemens PLM calendars are now available...

(OP)
Note that we're currently soliciting images for the 2013 Siemens PLM Software Calendar:

http://www.plm.automation.siemens.com/app/gallery/...

Any person or organization who are customers of Siemens PLM Software (or any of our partners) are invited to logon to the site above and submit images generated using either NX or Solid Edge.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources