Adding spreadsheet file in NX Drafting
Adding spreadsheet file in NX Drafting
(OP)
Ref'n: thread561-252038: Insert Excel table to nx5 drawing
Using Tabular note i added contents from an excel sheet to my drawing.
I wish to have the Cell-format also to be copied, (i.e size, width, merge etc) into my drawing sheet.
If not is there any other way to get the Excel sheet/ Image in NX Drawing.
Using Tabular note i added contents from an excel sheet to my drawing.
I wish to have the Cell-format also to be copied, (i.e size, width, merge etc) into my drawing sheet.
If not is there any other way to get the Excel sheet/ Image in NX Drawing.
Regards / Freundliche Grüße / Cordialement,
Subhash Madkatte
SIEMENS | I BT LV GC | R & D | Mumbai | India.
E-mail:subhash.madkatte@siemens.com; madkatte@gmail.com





RE: Adding spreadsheet file in NX Drafting
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
UG/NX Museum: http://www.plmworld.org/p/cm/ld/fid=209
To an Engineer, the glass is twice as big as it needs to be.
RE: Adding spreadsheet file in NX Drafting
John Lackowski
NX Support
Win 7 64bit NX 7.5.4.4 TC 8.3.1.1