bonding procedure specification(BPS)
bonding procedure specification(BPS)
(OP)
Hi every one
I want to get a sample for our PQR in GRP piping which can support appropriately our Bonding Procedure Specification based on Asme B31.3 (non-metallic Part). but despite an obvious state like WPS which is referred to Asme sec IX, there is no obvious list of essential variable(except those specified in Asme B31.3; which doesn't seem to be comprehensive.) and also there is no tolerance on each variable. Therefore I request anyone to share relative experience and if anyone have any sample format of BPS it will be so nice to share.
Thanks in advance
I want to get a sample for our PQR in GRP piping which can support appropriately our Bonding Procedure Specification based on Asme B31.3 (non-metallic Part). but despite an obvious state like WPS which is referred to Asme sec IX, there is no obvious list of essential variable(except those specified in Asme B31.3; which doesn't seem to be comprehensive.) and also there is no tolerance on each variable. Therefore I request anyone to share relative experience and if anyone have any sample format of BPS it will be so nice to share.
Thanks in advance





RE: bonding procedure specification(BPS)
Steve Jones
Materials & Corrosion Engineer
http://www.linkedin.com/pub/8/83b/b04