SKM Input Evaulation
SKM Input Evaulation
(OP)
In SKM while I am running the Load Flow Study, my LF kVA is coming 0.00 kVA through out the network. The Demand Load Study is fine.
There is also a problem with input evaulation for components although my components are well rated above demand load but still i am getting 100% Voltage drop.
See attachment for Input Evaluation. Also guide me on above.
There is also a problem with input evaulation for components although my components are well rated above demand load but still i am getting 100% Voltage drop.
See attachment for Input Evaluation. Also guide me on above.






RE: SKM Input Evaulation