Export NX Fonts to windows
Export NX Fonts to windows
(OP)
Hi
I need fonts 1 outline to engrave in other cam ¿how export the nx fonts to windows?
thanks
I need fonts 1 outline to engrave in other cam ¿how export the nx fonts to windows?
thanks





RE: Export NX Fonts to windows
Sorry, there is no practical way to do that as the NX font file format is proprietary to NX. Windows Fonts are generally in TrueType or OpenType format. NX fonts are neither.
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
UG/NX Museum: http://www.plmworld.org/p/cm/ld/fid=209
To an Engineer, the glass is twice as big as it needs to be.
RE: Export NX Fonts to windows
greetings
RE: Export NX Fonts to windows
Now there are some TrueType fonts which are very close to being a single line as well as some which might also work well for engraving, such as the Gulim and GulimChe fonts.
Another very thin TrueType font is Segoe UI Light, but that absolute thinest, making it virtually a single-line font, is RomanS.
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
UG/NX Museum: http://www.plmworld.org/p/cm/ld/fid=209
To an Engineer, the glass is twice as big as it needs to be.
RE: Export NX Fonts to windows
Greetings.
RE: Export NX Fonts to windows
http://prntscr.com/451sx