3 monitors...
3 monitors...
(OP)
I presently use 2 Samsung SyncMaster 213T 21", and I would like to add a dell ultrasharp 24". I have a nvidia quadro fx 3800 video card and it does have an additional port...so i think I can run 3 monitors. Does anyone have a 3 monitor setup? Will it work with UG?...Thx
Fred
NX 6.05.3 MP9





RE: 3 monitors...
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
UG/NX Museum: http://www.plmworld.org/p/cm/ld/fid=209
To an Engineer, the glass is twice as big as it needs to be.
RE: 3 monitors...
RE: 3 monitors...
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
UG/NX Museum: http://www.plmworld.org/p/cm/ld/fid=209
To an Engineer, the glass is twice as big as it needs to be.
RE: 3 monitors...
I have 2 same size 30" monitors, 1HP LP3065 and 1 HP ZR30W.
I use both for NX8 and stretch the modelling display now and then, but there is still the displayborder that devides the model.
What works best for me is undocking the assembly and part navigator and put them on the second monitor. Next to these I use NX viewer or pdf viewer or whatever office application.
Uploaded a screenshot.
Older budweiser
RE: 3 monitors...
Fred
NX 6.05.3 MP9
RE: 3 monitors...
Not the same as this setup had a dedicated graphics computer to drive the 3 displays.
"Wildfires are dangerous, hard to control, and economically catastrophic."
Ben Loosli
RE: 3 monitors...
I've seen something on TV where they project the screen image thru a fish-eye lens onto a (concave) semi-hemispherical screen.
Some place in San Fransisco i think it was... now that would be cool..
RE: 3 monitors...
At home (an ATI gaming gfx card) I have 3 connections at the back, but only 2 at the time is possible to use!
(I'm using it as 2 LCD-displays + TV, but to get the TV to show, I need to disable one of the displays)
Frank Hagström
www.conex.se