NX 8 Boarders and zones use sheet zone grid
NX 8 Boarders and zones use sheet zone grid
(OP)
When using sheet zone grid, should the grid be limited to only the sheet size or is it supposed to be infinite and just the size of the grid spacing match the sheet grid size? The reason I ask is because in the documentation it appears to end at the end of the sheet





RE: NX 8 Boarders and zones use sheet zone grid
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
UG/NX Museum: http://www.plmworld.org/p/cm/ld/fid=209
To an Engineer, the glass is twice as big as it needs to be.
RE: NX 8 Boarders and zones use sheet zone grid
RE: NX 8 Boarders and zones use sheet zone grid
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
UG/NX Museum: http://www.plmworld.org/p/cm/ld/fid=209
To an Engineer, the glass is twice as big as it needs to be.
RE: NX 8 Boarders and zones use sheet zone grid
RE: NX 8 Boarders and zones use sheet zone grid
RE: NX 8 Boarders and zones use sheet zone grid
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
UG/NX Museum: http://www.plmworld.org/p/cm/ld/fid=209
To an Engineer, the glass is twice as big as it needs to be.
RE: NX 8 Boarders and zones use sheet zone grid
I tried jiggling the handle... by toggling back in forth between modeling and drafting but the background color stayed gray until I went to a different part file.
RE: NX 8 Boarders and zones use sheet zone grid
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
UG/NX Museum: http://www.plmworld.org/p/cm/ld/fid=209
To an Engineer, the glass is twice as big as it needs to be.