Surface Finish Symbol not rotating
Surface Finish Symbol not rotating
(OP)
Hello
It seems that I do not know how to turn this symbol. The symbol can be rotated as long as is not associated with something. But soon is associated, behaves according to some different rules. How can I set this correctly.
Please see attached image
Regards
It seems that I do not know how to turn this symbol. The symbol can be rotated as long as is not associated with something. But soon is associated, behaves according to some different rules. How can I set this correctly.
Please see attached image
Regards





RE: Surface Finish Symbol not rotating
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
UG/NX Museum: http://www.plmworld.org/p/cm/ld/fid=209
To an Engineer, the glass is twice as big as it needs to be.
RE: Surface Finish Symbol not rotating
RE: Surface Finish Symbol not rotating
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
UG/NX Museum: http://www.plmworld.org/p/cm/ld/fid=209
To an Engineer, the glass is twice as big as it needs to be.
RE: Surface Finish Symbol not rotating
RE: Surface Finish Symbol not rotating
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
UG/NX Museum: http://www.plmworld.org/p/cm/ld/fid=209
To an Engineer, the glass is twice as big as it needs to be.
RE: Surface Finish Symbol not rotating