Tapered, Light Gauge Steel, Angle Columns
Tapered, Light Gauge Steel, Angle Columns
(OP)
I'm analyzing an existing metal shade structure with tapered 14 gauge steel angle columns (8" legs at the top and 3" legs at the bottom). These columns are acting as beam columns being fixed at the top and pinned at the base.
This structure was fabricated in Dallas Texas in the 1970's. Does anyone have information / charts/ design examples on these type elements?
Thanks
This structure was fabricated in Dallas Texas in the 1970's. Does anyone have information / charts/ design examples on these type elements?
Thanks






RE: Tapered, Light Gauge Steel, Angle Columns
Quite likely the particular intricacies of members of so thin plates are not entirely well portraited in what given, but it is a start.
RE: Tapered, Light Gauge Steel, Angle Columns
RE: Tapered, Light Gauge Steel, Angle Columns