DLOAD help
DLOAD help
(OP)
Hello,
Can someone help me with using the DLOAD subroutine?
I've got a simple beam model. I'd like to apply loads in X and Y based on position, i.e. FX=2X FY=4Y.
Can someone advise? I've attached the python script that makes the simple model.
Any help would be greatly appreciated.
Thanks George
Can someone help me with using the DLOAD subroutine?
I've got a simple beam model. I'd like to apply loads in X and Y based on position, i.e. FX=2X FY=4Y.
Can someone advise? I've attached the python script that makes the simple model.
Any help would be greatly appreciated.
Thanks George





RE: DLOAD help
I too am entering the world of subroutines and it is steep learning curve. Also I am not sure if you need a subroutine for what you are trying to achieve?
I have found the following useful, I hope it helps.
- Abaqus Subroutines manual - look under DLOAD you will find information about it there
- See this link http
- Here is some documentation about abaqus subroutines: http:/