ASME Y14.43-2011 changes
ASME Y14.43-2011 changes
(OP)
Can anyone tell me or point me to somewhere that indicates what's changed with the new revision of the Y14.43 standard? Thanks.
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
ASME Y14.43-2011 changes
|
RE: ASME Y14.43-2011 changes
Following are the revisions to this edition of ASME Y14.43:
(a) Tables have been added to show definitions, sizes, tolerances, tolerance distribution, and roughness averages for various gage types and classes of fit.
(b) The datum feature translation symbol is used and its meaning simulated in gages.
(c) Moveable datum target simulators are shown for the movable datum target symbol.
(d) Oddly configured datum features are simulated in gages with more information on gage element sizes.
(e) More examples of push pin gages are shown.
(f) Threaded holes are shown gaged in improved detail.
(g) Completely disassemblable (sic) gages are shown in greater and improved detail.
(h) Curved surfaces as datum features are simulated in gages.
(i) Releasing and invoking spatial degrees of freedom for datum features is demonstrated and gaged.
(j) Radii referenced as datum features are simulated in gages.
(k) Offset slotted datum features are gaged.
(l) The new symbol for unequal or unilateral profile tolerances is shown on gages.
(m) Planar gaging elements referenced at basic locations are shown.
(n) More examples of RFS and RMB datums feature simulators are illustrated.
(o) Planar datum features are simulated at RMB and MMB.
(p) Datum feature patterns are simulated at RMB with expanding gage pins.
(q) More examples of profile of a surface used on oddly configured holes are shown.
(r) Conical datum features are shown fixture in order to gage radial holes.
(s) Complex datum patterns referenced at RMB and MMB were added.
Frank
RE: ASME Y14.43-2011 changes
RE: ASME Y14.43-2011 changes
Frank