NX4 with Windows 7 32-bit: Post Processor not working
NX4 with Windows 7 32-bit: Post Processor not working
(OP)
Hi all,
I've got NX4 installed on a Windows 7 32-bit machine... when I initiate Post Processor on NX a command screen opens real quick and then closes. I'm dead in the water and hoping one of you can help. Much appreciated
I've got NX4 installed on a Windows 7 32-bit machine... when I initiate Post Processor on NX a command screen opens real quick and then closes. I'm dead in the water and hoping one of you can help. Much appreciated





RE: NX4 with Windows 7 32-bit: Post Processor not working
Anthony Galante

Senior Support Engineer
NX4.0.4MP10, NX5.0.0->5.0.6, NX6.0.0->NX6.0.5, NX7.0.0->NX7.0.1 & NX7.5.0.32-> NX7.5.4.4, Beta NX8.0.0.23
RE: NX4 with Windows 7 32-bit: Post Processor not working
Thx,
RE: NX4 with Windows 7 32-bit: Post Processor not working
John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
http://www.plmworld.com/museum/
To an Engineer, the glass is twice as big as it needs to be.
RE: NX4 with Windows 7 32-bit: Post Processor not working
And what do you mean "initiate" the post processor?
Mark Rief
Product Manager
Siemens PLM
RE: NX4 with Windows 7 32-bit: Post Processor not working