Dowel symbol
Dowel symbol
(OP)
Hi,
I only find this symbol, but it's not associative to the hole, so if I change the position, I need to reposition the symbol manually with zoom.
Exist a solution to insert e dowel symbol associative to the hole position and with the dimension symbol equal to the dowel diameter ?
I only find this symbol, but it's not associative to the hole, so if I change the position, I need to reposition the symbol manually with zoom.
Exist a solution to insert e dowel symbol associative to the hole position and with the dimension symbol equal to the dowel diameter ?
Thank you...
Using NX 7.0.1.7 MP3 and TC8.1





RE: Dowel symbol
First it will ask you what drafting object you want to place the symbol on (pick the centerline) then it will ask you where on that drafting object you want the symbol to be placed (pick the center point of the centerline).
RE: Dowel symbol
RE: Dowel symbol
You have different version, but I think the process is the same.
Thank you...
Using NX 7.0.1.7 MP3 and TC8.1
RE: Dowel symbol
John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
http://www.plmworld.com/museum/
To an Engineer, the glass is twice as big as it needs to be.
RE: Dowel symbol
sorry for the delay, but we had the NX8 presentation.
Thank you for the long explication, so is understandable for all level of NX knowledge.
Thank you...
Using NX 7.0.1.7 MP3 and TC8.1
RE: Dowel symbol
what I'm not able to do is associate the hole dimension to the hole symbol dimension.
I need to scale the symbol manually, so if the hole change dimension, I need for every symbol, redefine manually.
Thank you...
Using NX 7.0.1.7 MP3 and TC8.1